Puro Back Cover for iPad 2 - MelaPolis.com
Introduced just a few days ago, is coming soon to the best accessories stores the new housing Puro Back Cover for iPad 2, an interesting protective solution designed to keep safe the fine (and delicate) in brushed aluminum back of the iPad 2. With a plus rather interesting: Series Back Covers has been designed to be fully compatible with the display cover for the official Apple Smart Cover.
Thanks to the availability of Puro we received a preview of a specimen to be analyzed for the realization hl7 orm of the review. Starting from the usual packaging, a cardboard box mixed-plastic modern and built so as to focus attention on the product, place in plain sight under a large area transparent. Net profit for the producer to promote the content, while useful for the buyer who can immediately realize the cosmetic condition of the specimen that is going to buy. It is a reusable packaging, obviously for storing roughly only the Back Cover due to the reduced thickness.
Basically it is a shell (or better a half-shell) made of rigid polycarbonate covered with a coating, in our case green, for soft-touch effect. The special matte finish hl7 orm to entirely cover the surfaces of the Back Cover, interior and exterior, helping to improve the maneuverability thanks to an effective grip, as well as to reduce the amount of fingerprints and scratches that could raise the back.
Overall, considerable care is lavished on the creation, hl7 orm are in fact absent molding protrusions, hl7 orm signs of joint and machining residues. Handling hl7 orm it for the first time the question is how and where the attachment of the cover to happen, given the ultra-thin profile of the second-generation tablet. hl7 orm
Simply place the Back Cover over the iPad 2 and with a slight pressure in the send attachment points that are located on the 4 corners hl7 orm of the enclosure where small steps, incredibly small, grip the aluminum body settling accurately without references to games, movements or noises typical of a pair precarious.
The profile of the Back Cover is quite hectic, almost anywhere along the border are within or openings for the dock connector or you want to lower the speaker and moving away from the holes for the rear camera and headphone jack. But it is on the left side of the designers of Pure drew a recess rather "smart", that is intended to make the Back Cover compatible with the Smart Cover which is able to magnetically engage without the slightest impediment. Well done.
Good level of protection offered by the cover, for obvious reasons of design does not come to dominate the level of the screen, then it does not offer an effect lay-on-the-table, hl7 orm but it is mitigated by the fact that the Smart Cover-up menu is concerned with protecting the touchscreen display. We tried to find out if the Back Cover can come into contact with the aluminum of the back, unfortunately it is not easy given that the coupling appears to be quite solid and free from movement, to be sure we would have liked to see a couple of thin adhesive strips in soft tissue to act as a spacer between the plastic and the aluminum alloy so as to dispel any concern departing.
In a nutshell, the Puro Back Cover we liked: lightweight, designed with attention to detail and made with care it is able to offer a good level of protection in the one area where Apple has not provided any protection from external agents during 'use of the device hl7 orm on a daily basis.
Pros achievement in ultra-thin hard polycarbonate with soft-touch matte finish and precise measurements appreciable care lavished on the construction of the cover attachment sincere, solid and no mention of games, movements or squeaks fully compatible with the official Apple Smart Cover
Articles that might interest you: Puro Plasma Cover for iPad also 1ideaitalia enters the market with the iPad cover Puro Plasma Cover. A housing made of semi-transparent TPU able to offer a high degree of protection to the precious ... Puro Holder Cover for iPad 2 A generous dose of silicone to the queen of the Italian cover for iPad 2 with a high degree hl7 orm of protection. With today's review we try custody Pure Holder Cover ... Pure Hybrid Case Cover for iPad 2 The cover of the hybrid type are generally able to offer the highest levels of protection. With product reviews today we discover together the new housing Puro ... Puro Zeta Cover for iPad 2 The new Puro Zeta Co.
Introduced just a few days ago, is coming soon to the best accessories stores the new housing Puro Back Cover for iPad 2, an interesting protective solution designed to keep safe the fine (and delicate) in brushed aluminum back of the iPad 2. With a plus rather interesting: Series Back Covers has been designed to be fully compatible with the display cover for the official Apple Smart Cover.
Thanks to the availability of Puro we received a preview of a specimen to be analyzed for the realization hl7 orm of the review. Starting from the usual packaging, a cardboard box mixed-plastic modern and built so as to focus attention on the product, place in plain sight under a large area transparent. Net profit for the producer to promote the content, while useful for the buyer who can immediately realize the cosmetic condition of the specimen that is going to buy. It is a reusable packaging, obviously for storing roughly only the Back Cover due to the reduced thickness.
Basically it is a shell (or better a half-shell) made of rigid polycarbonate covered with a coating, in our case green, for soft-touch effect. The special matte finish hl7 orm to entirely cover the surfaces of the Back Cover, interior and exterior, helping to improve the maneuverability thanks to an effective grip, as well as to reduce the amount of fingerprints and scratches that could raise the back.
Overall, considerable care is lavished on the creation, hl7 orm are in fact absent molding protrusions, hl7 orm signs of joint and machining residues. Handling hl7 orm it for the first time the question is how and where the attachment of the cover to happen, given the ultra-thin profile of the second-generation tablet. hl7 orm
Simply place the Back Cover over the iPad 2 and with a slight pressure in the send attachment points that are located on the 4 corners hl7 orm of the enclosure where small steps, incredibly small, grip the aluminum body settling accurately without references to games, movements or noises typical of a pair precarious.
The profile of the Back Cover is quite hectic, almost anywhere along the border are within or openings for the dock connector or you want to lower the speaker and moving away from the holes for the rear camera and headphone jack. But it is on the left side of the designers of Pure drew a recess rather "smart", that is intended to make the Back Cover compatible with the Smart Cover which is able to magnetically engage without the slightest impediment. Well done.
Good level of protection offered by the cover, for obvious reasons of design does not come to dominate the level of the screen, then it does not offer an effect lay-on-the-table, hl7 orm but it is mitigated by the fact that the Smart Cover-up menu is concerned with protecting the touchscreen display. We tried to find out if the Back Cover can come into contact with the aluminum of the back, unfortunately it is not easy given that the coupling appears to be quite solid and free from movement, to be sure we would have liked to see a couple of thin adhesive strips in soft tissue to act as a spacer between the plastic and the aluminum alloy so as to dispel any concern departing.
In a nutshell, the Puro Back Cover we liked: lightweight, designed with attention to detail and made with care it is able to offer a good level of protection in the one area where Apple has not provided any protection from external agents during 'use of the device hl7 orm on a daily basis.
Pros achievement in ultra-thin hard polycarbonate with soft-touch matte finish and precise measurements appreciable care lavished on the construction of the cover attachment sincere, solid and no mention of games, movements or squeaks fully compatible with the official Apple Smart Cover
Articles that might interest you: Puro Plasma Cover for iPad also 1ideaitalia enters the market with the iPad cover Puro Plasma Cover. A housing made of semi-transparent TPU able to offer a high degree of protection to the precious ... Puro Holder Cover for iPad 2 A generous dose of silicone to the queen of the Italian cover for iPad 2 with a high degree hl7 orm of protection. With today's review we try custody Pure Holder Cover ... Pure Hybrid Case Cover for iPad 2 The cover of the hybrid type are generally able to offer the highest levels of protection. With product reviews today we discover together the new housing Puro ... Puro Zeta Cover for iPad 2 The new Puro Zeta Co.
No comments:
Post a Comment